stability raises a handful of sensible questions. This page answers them in order, starting with the fundamentals and moving to applications.
Reviewed 2025-09-11. Anything still debated is marked as such rather than presented as settled.
Quality assessment of a lyophilized product includes cake appearance, residual moisture, reconstitution time, and container closure integrity. A uniform, porous cake suggests that freezing and drying stayed within the formulation's design space. Cracks, shrinkage, meltback, or a glassy film can indicate thermal abuse or a formulation problem. Analysts also test for subvisible particles and sterility when the product requires those specifications. Visual inspection alone cannot confirm biological activity or chemical stability, so it is combined with analytical methods.
Stability programs monitor lyophilized products under defined temperature and humidity conditions over time. Real-time studies at recommended storage conditions are the reference, while accelerated studies provide early signals of degradation pathways. Because a dry cake can still undergo oxidation, hydrolysis, or aggregation, stability depends on residual moisture, excipients, and container headspace. Open questions include how best to predict long-term stability from short accelerated runs and how vial-to-vial variability affects shelf life. Current guidance treats these predictions as product-specific rather than universally generalizable.
Quality control also examines cake structure, color, and reconstitution behavior. A collapsed or shrunken cake can indicate a thermal excursion during drying. Analytical methods such as X-ray diffraction, differential scanning calorimetry, and near-infrared spectroscopy can detect crystallinity or moisture distribution. Regulatory expectations focus on validated assays and lot-to-lot consistency. Questions remain about how well accelerated stability tests predict long-term behavior for every formulation. Visual inspection remains common but is subjective without trained reviewers and reference images.
After lyophilization, a product's quality depends on residual moisture, cake appearance, and reconstitution time. Residual moisture is often measured by Karl Fischer titration or thermogravimetric analysis. A low moisture content can slow chemical degradation, but overly dry cakes may be brittle or slow to dissolve. Stability studies track these attributes over months under defined temperature and humidity conditions. Batch records link these measurements to specific process runs and help identify trends before a product fails specification.
| Property | Value | Notes |
|---|---|---|
| Cake appearance | Uniform porous plug | Cracks, shrinkage, or meltback suggest process deviation. |
| Reconstitution time | 10 seconds to 5 minutes | Depends on cake structure, diluent, and agitation. |
| Typical storage humidity | Below 60% relative humidity | Lower humidity limits moisture uptake by hygroscopic cakes. |
| Container closure | Glass vial, elastomer stopper, crimp seal | Seal integrity limits moisture and oxygen ingress. |
| Common moisture test | Karl Fischer titration | Measures residual water content in the dried solid. |
Handling practices aim to prevent moisture ingress and mechanical damage. Vials should remain stoppered and crimped until use, and reconstitution should follow the labeled diluent and volume. Shipping may involve temperature-controlled containers and desiccants, but direct contact between desiccant and product is avoided. Regulatory guidance expects documented storage conditions, excursion assessments, and stability commitments. Open questions remain about how best to predict long-term stability from short accelerated studies for every formulation class.
After lyophilization, the product is usually a porous cake or powder with a large internal surface area. This structure can absorb moisture quickly if exposed to humid air, so vials are sealed under vacuum or an inert gas. Moisture uptake may lower the glass transition temperature of the dried matrix and accelerate chemical or physical degradation. Storage conditions therefore depend on the formulation, container, and intended shelf life. Some products remain stable at room temperature, while others require refrigeration or freezing.
Reconstitution involves adding a suitable diluent, often sterile water or a buffer, to the dried cake. Gentle swirling or inversion helps dissolve the material without creating excessive foam. The time required for complete dissolution can range from seconds to several minutes and depends on the cake structure and the diluent. Improper reconstitution, such as vigorous shaking or using the wrong diluent, can cause protein aggregation or loss of activity. After reconstitution, the product may have a limited shelf life and should be used according to its labeling.
Lyophilized products are typically hygroscopic and require protection from moisture during storage. Manufacturers seal them in glass vials, often under vacuum or an inert gas such as nitrogen. The container closure system, including the stopper and crimp seal, must prevent water vapor ingress. Storage temperature varies from controlled room temperature to refrigerated or frozen conditions, depending on the formulation. Humidity-controlled environments are essential because even brief exposure to ambient air can degrade the product.
Stability of a lyophilized product depends on its glass transition temperature, the temperature at which the amorphous cake transitions from a glassy to a rubbery state. Storage below this temperature minimizes molecular mobility and slows chemical degradation. If the storage temperature exceeds the glass transition temperature, the cake may collapse, shrink, or become sticky. Accelerated stability studies at elevated temperatures and humidity help predict shelf life, but they do not always reflect real-time behavior. Residual moisture content also plays a critical role in long-term stability.
Stability of a lyophilized solid depends on water content, temperature, and the physical state of the formulation. Amorphous products may slowly absorb moisture and drop below their glass transition temperature, causing collapse or crystallization. Some proteins and peptides can aggregate even in a dry state, especially when exposed to heat or moisture. Accelerated stability studies at elevated temperature and humidity help estimate shelf life, but real-time data remain the basis for expiration dating.
After drying, a lyophilized product is usually sealed under vacuum or an inert gas to limit moisture and oxygen exposure. The container closure system matters because stoppers and seals can allow moisture ingress over time. Storage conditions are selected from stability studies that track potency, cake appearance, and reconstitution behavior. Many freeze-dried materials are kept at controlled room temperature, while some require refrigeration or protection from light.
Quality control for freeze-dried forms includes visual inspection, water content measurement, and reconstitution time. A satisfactory cake is typically uniform, porous, and intact, although minor shrinkage or cracking may be acceptable if specifications allow. Karl Fischer titration, thermal gravimetric analysis, and near-infrared spectroscopy are used to measure water content. Reconstitution is assessed by adding a specified diluent and recording the time and ease of dissolution. Microbiological and particulate tests are added when the product is sterile or intended for injection.
==== Biomarkers of cereal presence in archaeological pottery ==== Recently, alkylresorcinols have been widely recognised as a biomarker for the presence of cereals in archaeological pottery. They were previously found in a well-preserved Bronze Age wooden container from Switzerland, and coarse ware vessels from a Roman cavalry barrack at Vindolanda. A study demonstrated that the survival of ARs is highly dependent on the cooking procedures and burial conditions. However, if recoverable, analysis of these phenolic lipids in archaeological contexts is valuable as it can help explain the uptake and spread of cereal processing of past communities in particular regions.
=== Sclerodactyly === Though it is the most easily recognizable manifestation, it is not prominent in all patients. Thickening generally only involves the skin of the fingers distal to the metacarpophalangeal joints in CREST. Early in the course of the disease, the skin may appear edematous and inflamed. Eventually, dermal fibroblasts overproduce extracellular matrix leading to increased tissue collagen deposition in the skin. Collagen cross-linking then causes a progressive skin tightening. Digital ischemic ulcers commonly form on the distal fingers in 30–50% of patients.
Myocardial infarction (MI) refers to tissue death (infarction) of a part of the heart muscle (myocardium), caused by ischemia, the lack of oxygen delivery to myocardial tissue. It is a type of acute coronary syndrome, which describes a sudden or short-term change in symptoms related to blood flow to the heart. Unlike the other type of acute coronary syndrome, unstable angina, a myocardial infarction occurs when there is cell death, which can be estimated by a blood test that measures biomarkers (the cardiac protein troponin). When there is evidence of an MI, it may be classified as an ST elevation myocardial infarction (STEMI) or non-ST elevation myocardial infarction (NSTEMI) based on the results of an ECG. Another approach suggests categorizing MI as either occlusion myocardial infarction (OMI) or non-occlusion myocardial infarction (NOMI), depending on evidence of coronary occlusion on ECG. Preliminary research suggests that using OMI/NOMI above STEMI/NSTEMI leads to improved clinical outcomes, as such terminology does not limit the diagnosis of acute coronary occlusion to current STEMI criteria, which alone have poor sensitivity for MI. The phrase "heart attack" is often used non-specifically to refer to myocardial infarction. An MI is different from—but can cause—cardiac arrest, where the heart is not contracting at all or so poorly that all vital organs cease to function, thus leading to death. It is also distinct from heart failure, in which the pumping action of the heart is impaired. However, an MI may lead to heart failure.
Hydroxychloroquine, sold under the brand name Plaquenil among others, is a medication used to prevent and treat malaria in areas where malaria remains sensitive to chloroquine. Other uses include treatment of rheumatoid arthritis, lupus, and porphyria cutanea tarda. It is taken by mouth, often in the form of hydroxychloroquine sulfate. Common side effects may include vomiting, headache, blurred vision, and muscle weakness. Severe side effects may include allergic reactions, retinopathy, and irregular heart rate. Although all risk cannot be excluded, it remains a treatment for rheumatic disease during pregnancy. Hydroxychloroquine is in the antimalarial and 4-aminoquinoline families of medication. Hydroxychloroquine was approved for medical use in the United States in 1955. It is on the World Health Organization's List of Essential Medicines. In 2023, it was the 131st most commonly prescribed medication in the United States, with more than 4 million prescriptions. Hydroxychloroquine has been studied for an ability to prevent and treat coronavirus disease 2019 (COVID-19), but clinical trials found it ineffective for this purpose and a possible risk of dangerous side effects. Among studies that deemed hydroxychloroquine intake to cause harmful side effects, a publication by The Lancet was retracted due to data flaws. The speculative use of hydroxychloroquine for COVID-19 threatens its availability for people with established indications.
Interventional radiology (IR or sometimes VIR for vascular and interventional radiology) is a subspecialty of radiology in which minimally invasive procedures are performed using image guidance. Some of these procedures are done for purely diagnostic purposes (e.g., angiogram), while others are done for treatment purposes (e.g., angioplasty). The basic concept behind interventional radiology is to diagnose or treat pathologies, with the most minimally invasive technique possible. Minimally invasive procedures are currently performed more than ever before. These procedures are often performed with the patient fully awake, with little or no sedation required. Interventional radiologists and interventional radiographers diagnose and treat several disorders, including peripheral vascular disease, renal artery stenosis, inferior vena cava filter placement, gastrostomy tube placements, biliary stents and hepatic interventions. Radiographic images, fluoroscopy, and ultrasound modalities are used for guidance, and the primary instruments used during the procedure are specialized needles and catheters. The images provide maps that allow the clinician to guide these instruments through the body to the areas containing disease. By minimizing the physical trauma to the patient, peripheral interventions can reduce infection rates and recovery times, as well as hospital stays. To be a trained interventionalist in the United States, an individual completes a five-year residency in radiology and a one- or two-year fellowship in IR.
Sources: en.wikipedia.org
==== Canada ==== Health Canada has investigated the risks and benefits of pseudoephedrine and ephedrine/Ephedra. Near the end of the study, Health Canada issued a warning on their website stating that those who are under the age of 12, or who have heart disease and may have strokes, should avoid taking pseudoephedrine and ephedrine. Also, they warned that everyone should avoid taking ephedrine or pseudoephedrine with other stimulants like caffeine. They also banned all products that contain both ephedrine (or pseudoephedrine) and caffeine. Products whose only medicinal ingredient is pseudoephedrine must be kept behind the pharmacy counter. Products containing pseudoephedrine along with other medicinal ingredients may be displayed on store shelves but may be sold only in a pharmacy when a pharmacist is present. Pseudoephedrine is a Schedule VI Class A precursor in Canada under the Controlled Drugs and Substances Act.
Allmusic's Brian Olewnick called it "Either/Orchestra's finest, most accomplished release" and said: "Beautifully recorded by legendary engineer Rudy van Gelder, the band is extraordinarily tight and vibrant, showing none of the muddy quality that would sully some of their later work ... Quite a journey, resulting in arguably the best of this unusual band's release. Very highly recommended".
Ephedrine and pseudoephedrine are also relative, not absolute, contraindications. They are generally avoided or used only cautiously at reduced doses with monitoring because they may raise blood pressure. Pseudoephedrine is less potent than ephedrine, and ephedrine is less potent than amphetamine. Phenelzine generally does not need to be stopped before surgery solely because anesthesia is planned. Modern guidance states that MAOI treatment should not be discontinued without conferring with the prescribing psychiatrist, because depressive relapse risk may outweigh perioperative interaction risk when anesthetic and analgesic agents are chosen carefully. In perioperative care, the main drugs to avoid are those with significant serotonin reuptake inhibition or serotonin-releasing activity, especially serotonergic opioid analgesics such as meperidine (pethidine) and tramadol. Other opioids listed as serotonergic or uncertain-risk include methadone, tapentadol, dextromethorphan, dextropropoxyphene, pentazocine, and levorphanol. Other perioperative agents requiring avoidance or special caution include pancuronium, a muscle relaxant sometimes used with general anesthetics, and methylene blue, which has clinically relevant MAOI activity itself. These are not avoided because they are serotonin reuptake inhibitors. Direct-acting vasopressors such as epinephrine, norepinephrine, and phenylephrine are not absolute contraindications, but lower initial doses and careful titration are advised because their pressor effects may be potentiated.
[Adenosyl−O−PO2−O−PO2−O−PO3]4− + ROH → [Adenosyl−O−PO2−O−PO3H]2− + [RO−P−O3]2− This equation can be written in several ways that are nearly equivalent that describe the behaviors of various protonated states of ATP, ADP, and the phosphorylated product. As is clear from the equation, a phosphate group per se is not transferred, but a phosphoryl group (PO3-). Phosphoryl is an electrophile. This process and its inverse, dephosphorylation, are common in biology. Protein phosphorylation often activates (or deactivates) many enzymes.
The Chinese Nationalist Air Force obtained the P-51 during the late Sino-Japanese War to fight against the Japanese. After the war, Chiang Kai-shek's Nationalist government used the planes against insurgent Communist forces. The Nationalists retreated to Taiwan in 1949. Pilots supporting Chiang brought most of the Mustangs with them, where the aircraft became part of the island's defense arsenal. People's Republic of China
Sources: en.wikipedia.org
Affinity purification purifies proteins by retaining them on a column through their affinity to antibodies, enzymes, or receptors that have been immobilised on the column. Filtration is a mechanical method to separate solids from liquids or gases by passing the feed stream through a porous sheet such as a cloth or membrane, which retains the solids and allows the liquid to pass through. Centrifugation is a process that uses an electric motor to spin a vessel of fluid at high speed to make heavier components settle to the bottom of the vessel. Evaporation removes volatile liquids from non-volatile solutes, which cannot be done through filtration due to the small size of the substances. Liquid–liquid extraction removes an impurity or recovers a desired product by dissolving the crude material in a solvent in which other components of the feed material are soluble. Crystallization separates a product from a liquid feed stream, often in extremely pure form, by cooling the feed stream or adding precipitants that lower the solubility of the desired product so that it forms crystals. The pure solid crystals are then separated from the remaining liquor by filtration or centrifugation. Recrystallization: In analytical and synthetic chemistry work, purchased reagents of doubtful purity may be recrystallised, e.g. dissolved in a very pure solvent, and then crystallized, and the crystals recovered, in order to improve and/or verify their purity. Trituration removes highly soluble impurities from usually solid insoluble material by rinsing it with an appropriate solvent.
Routine toxicology studies have provided no evidence that moxonidine has any teratogenic, mutagenic or carcinogenic potential. No evidence has been found of serious adverse effects on organs or organ systems, and the drug has not been shown to have deleterious effects on perinatal or postnatal growth and development.
α-Ketobutyric acid is an organic compound with the formula CH3CH2C(O)CO2H. It is a colorless solid that melts just above room temperature. Its conjugate base α-ketobutyrate is the predominant form found in nature (near neutral pH). It results from the lysis of cystathionine. It is also one of the degradation products of threonine, produced by the catabolism of the amino acid by threonine dehydratase. It is also produced by the degradation of homocysteine and the metabolism of methionine. It is a precursor to the commercial route to levetiracetam, an anti-epileptic drug, and homoalanine. α-Ketobutyrate is transported into the mitochondrial matrix, where it is converted to propionyl-CoA by branched-chain alpha-keto acid dehydrogenase complex. Further mitochondrial reactions produce succinyl-CoA. This is first through the enzyme mitochondria propionyl-CoA carboxylase with biotin as a cofactor to produce (S)-methylmalonyl-CoA. This is subsequently converted to (R)-methylmalonyl-CoA by mitochondrial methylmalonyl-CoA epimerase. Finally, mitochondrial methylmalonyl-CoA mutase with cofactor adenosylcobalamin produces succinyl-CoA which enters the citric acid cycle.
Non-resorbable membranes: The main types of non-resorbable barrier membranes are expanded polytetrafluoroethylene (e-PTFE), high-density polytetrafluoroethylene (d-PTFE), titanium mesh and titanium-reinforced PTFE. Expanded polytetrafluoroethylene (e-PTFE) became the most common non-resorbable membrane used for bone regeneration in the 1990s. Gore-Tex was the most popular type of e-PTFE. The e-PTFE membrane is sintered with pores of 5 - 20 μm within the framework of the material. The e-PTFE membrane behaves as a barrier to prevent fibroblasts and various connective-tissue cells from entering the bone defect in order to allow the slower moving cells that are osteogenic to repopulate the defect. A study used e-PTFE membranes to cover surgically constructed average size bone defects in the mandibular angles of rats. Consequently, the e-PTFE membrane acted as a barrier to soft tissue and sped up bone healing, which took place between 3–6 weeks while no healing occurred in the non-membrane control group during a 22 week period. The biological method of osteopromotion by exclusion is good for predicting ridge growth or defect regeneration. Resorbable membranes: There are many different types of resorbable membranes out there but the main ones are synthetic polymers and natural biomaterials. Synthetic polymers are such that it is a polylactic acid bilayer, or the collagen-derived membranes. These membranes can be obtained from bovine or porcine or dermis. E.g.
=== Use in water treatment === Nelumbo nucifera shows high potential for usage in wastewater treatment removing polluting compounds and heavy metals. It is able to grow in variable water conditions and in low light intensity. Various studies show the successful use of N. nucifera to counteract water eutrophication. The leaves of the floating lotus reduce sunlight reaching the lower part of the water. This suppresses algae growth in N. nucifera aquatic systems and thus, the oxygen content is up to 20% higher than in other aquatic plant systems. Due to intense agricultural practices, nitrogen and phosphorus pollution are major problems in aquatic systems. N. nucifera is able to assimilate a higher content of phosphorus than aquatic plants currently used for water remediation (such as water hyacinth). It also assimilates nitrogen ("denitrification") and creates a habitat for bacterial growth in the water body. Through rhizofiltration, heavy metals – including arsenic, copper, and cadmium – can be removed efficiently from the water. The results observed are impressive showing 96% of copper and 85% cadmium metals removed after a seven-day incubation period. The accumulation of heavy metals doesn't show morphological symptoms of metal toxicity; however, the rhizome quality for human consumption needs further study.
Sources: en.wikipedia.org
Many dried cakes are hygroscopic and can adsorb water during storage or handling. Absorbed moisture may lower the glass transition temperature and promote chemical reactions. Sealed packaging and controlled humidity reduce this risk.
Cake collapse usually means the product became too warm during the drying cycle. The dried matrix loses porosity and may appear shrunken or glassy. Collapse can slow reconstitution and may signal altered stability, though not every collapsed cake fails specifications.
Karl Fischer titration is a common method for measuring residual water in lyophilized solids. Loss on drying and thermogravimetric analysis are also used in some settings. The chosen method should be validated for the specific formulation and moisture range.
Karl Fischer titration is a common reference method that quantifies water by a chemical reaction. Thermogravimetric analysis can also estimate moisture by weight loss on heating. Method choice depends on sample size and whether other volatile substances are present.